Owner's Manual
Table Of Contents
- Quick Start Guide
- Owners Guide
- Reset
- Pairing
- Table of Contents
- Introduction / Features
- Unpacking the System
- Placement Guidelines
- Setting Up the Acoustimass Module
- Setting Up the Console
- Setting Up the Soundbar
- Connecting the System to Power
- Starting Up the System
- Finishing Setup
- Using the System
- Understanding messages on the display
- Troubleshooting
- Specs
- Universal Remote Device Codes
- Warranty
English - 23
Using the System
Test your HDMI™-connected sources for CEC
Test each of your sources for CEC using the remote control.
Note: Your HDMI-connected source may not support CEC. Refer to your source
owner’s guide for more information.
1. Power off the Bose
®
system.
2. Prepare your source:
• If you are testing your TV, power off your TV.
• If you are testing another source, power off the source. Power on your TV.
3. Press the button for the source you are testing.
The source button glows. The source and system power on.
4. To ensure your source works properly with your remote control, press a variety
of buttons that correspond with your source’s functions.
If your source does not perform one of the functions, program the remote
control (see page 24).