Owner's Manual
Table Of Contents
- Quick Start Guide
- Owners Guide
- Reset
- Pairing
- Table of Contents
- Introduction / Features
- Unpacking the System
- Placement Guidelines
- Setting Up the Acoustimass Module
- Setting Up the Console
- Setting Up the Soundbar
- Connecting the System to Power
- Starting Up the System
- Finishing Setup
- Using the System
- Understanding messages on the display
- Troubleshooting
- Specs
- Universal Remote Device Codes
- Warranty
12 - English
Connecting the console to your TV’s
HDMI™ ARC connector
Use the Bose
®
HDMI cable to connect the console to your TV.
1. Disconnect your HDMI-connected sources, such as a cable/satellite box, DVD
or Blu-ray Disc
™
player or game system, from your TV.
2. Insert one end of the Bose
®
HDMI cable into the TV connector on the console.
3. Insert the other end of the HDMI cable into your TV’s HDMI connector.
Note: Use your TV’s HDMI connector labeled ARC or Audio Return Channel
if available. If your TV does not have an HDMI ARC connector,
see page 13.
Setting Up the Console