Owner's Manual
Table Of Contents
- Quick Start Guide
- Owners Guide
- Reset
- Pairing
- Table of Contents
- Introduction / Features
- Unpacking the System
- Placement Guidelines
- Setting Up the Acoustimass Module
- Setting Up the Console
- Setting Up the Soundbar
- Connecting the System to Power
- Starting Up the System
- Finishing Setup
- Using the System
- Understanding messages on the display
- Troubleshooting
- Specs
- Universal Remote Device Codes
- Warranty
10 - English
Attaching the rubber feet to the
Acoustimass module
Attach the rubber feet to the Acoustimass module to protect your floor.
1. Turn the Acoustimass module upside down onto a soft surface to protect it
from being damaged.
2. Attach the rubber feet to the bottom of the Acoustimass module.
Bottom of Acoustimass module
Rubber foot
3. Place the Acoustimass module on its feet.
Caution: Do not place the Acoustimass module on its front, back end, side or
top when in use.
4. Remove all protective films. These may affect acoustic performance if left
in place.
Setting Up the Acoustimass
®
Module