Operation Manual

30
Operation
Changing CD settings
While the system is in CD mode, press the Settings button on the remote control to gain
access to the options shown here. For more details on changes you can make to the settings,
refer to the Sound Adjustments and System Adjustments sections of this guide.
Using the sleep timer
Your system includes a sleep timer which can be set to turn your system off automatically
after 1 to 90 minutes of listening to any source. This timer can be accessed through the Set-
tings menu. See “Locating system settings” on page 35.
Note: Remember that system controls, like the sleep timer, will not turn off the TV or other
sound source components.
Using the radio
Press or on the remote to select the radio tuner. If the system is off, this will turn it on
to the most recently selected station in that band.
Tuning
You can tune to a radio station in the following ways:
While the system is in AM or FM mode, and the TV is on, you can press the Settings button
on the remote control to gain access to the options available for that band. For more details
on changes you can make to the settings, refer to the Sound Adjustments and System
Adjustments sections of this guide.
Selection: CD setting options: What the setting affects:
Sleep Timer: Off
mm:ss
Timer not set.
Set to turn system off (not the components) when time (01:00 to 90:00
minutes) expires.
Track: 1 of n Chooses the CD track by number.
Track Time: h:mm:ss Moves to that time/place in the track.
CD Status selection Displays information about the CD source.
Audio Setup selection See Sound Adjustments on page 33.
System Setup selection See System Adjustments on page 35.
If you want to: Do this:
Switch bands Press or on the remote for the band you want.
Seek the strongest stations Press and hold Seek or on the remote until the radio
begins seeking. Release to stop at the next strongest sta-
tion.
To stop sooner, briefly press Seek or .
To begin seeking again without holding down the skip but-
ton, briefly press Seek or again as soon as the first
seek operation stops.
Manually tune to a station Press Tune or on the remote.
Select a preset station Press Preset
or
Press that number on the keypad.
AM256950_02_V.pdf • January 29, 2002