Speaker User's Manual

English

Figure 12

Sliding the speakers into the

brackets

Figure 10

Installing the bracket onto a deck

railing or table

Figure 11

Installing the knobs

Attaching the speakers to the brackets

Once the brackets are installed, carefully follow these steps to attach the speakers to the

brackets. First, insert the knobs into each side of the speakers. Be sure to turn each knob two

full rotations (Figure 11). Then, carefully slide the speakers into the brackets (Figure 12). Finally,

temporarily tighten the speaker in a position that will allow you to easily connect the speaker

wire (Figures 13A and 13B).

two full rotations

Installing the mounting brackets (cont.)

Installing the brackets onto a deck railing or table (cont.)

Finally, install the four screws using a Phillips-head screwdriver (Figure 10).

Installing Your 251

Speakers

Note: If you are mounting your 251

speakers on a deck railing or table, you will need to rotate the

Bose logo. Refer to “Rotating the Bose logo” on page 11 for instructions on how to do this.