DesignMax DM5SE Surface-mount Loudspeaker Installation Guide. . . . . . . . . . . . . . . . . . . . . . . . 2 Guía de instalación. . . . . . . . . . . . . . . . . . . . . . 9 Notice d’installation . . . . . . . . . . . . . . . . . . . . 16 Installationsanleitung. . . . . . . . . . . . . . . . . . . 23 Guida all'installazione. . . . . . . . . . . . . . . . . . 30 Installatiehandleiding. . . . . . . . .
Important Safety Instructions Please read and keep all safety and use instructions. This product is intended for installation by professional installers only! This document is intended to provide professional installers with basic installation and safety guidelines for this product in typical fixed-installation systems. Please read this document and all safety warnings before attempting installation. Do not attempt to service this product yourself.
Overview PRO.BOSE.COM Package Contents ×2 ×2 ×2 ×2 Product Dimensions 208 mm 8.19 in 197 mm 7.75 in 192 mm 7.56 in 192 mm 7.56 in 286 mm 11.25 in Ø 5.5 mm 0.22 in Technical Specifications For additional specifications, see the DesignMax DM5SE technical data sheet at PRO.BOSE.COM. Physical Product Dimensions Height: 286 mm (11.25 in) Width: 192 mm (7.56 in) Depth: 197 mm (7.75 in) Net Weight, Loudspeaker with grille and bracket (single) 4.75 kg (10.5 lb) Shipping Weight (pair) 11.43 kg (25.
Setup PRO.BOSE.COM Installation Options q w Installation Options and Accessories q Mounting bracket (included) w MBPWR-50 pan-and-tilt bracket (optional) Single In In and Out Wide Open Preparing the Weather-resistant Input Cover The weather-resistant input cover is designed for three different wiring scenarios (see above). To change the configuration of the input cover to support your wiring scenario, cut along the perforation on the rubber conduit.
Setup PRO.BOSE.COM Wiring the Loudspeaker Wire Gauge The DesignMax DM5SE loudspeaker is designed to work with 18 AWG (0.8 mm2) to 14 AWG (2.1 mm2) size wire only. Connection Diagrams Expose six millimeters (1/4 inch) of bare wire to attach to the terminals. Note: The loudspeaker is not rated for use with a rigid conduit. The loudspeaker is suitable for a flexible conduit or wiring connection only.
Setup PRO.BOSE.COM Loudspeaker Orientation q w Choose the loudspeaker orientation best suited for your installation. q Horizontal w Vertical Note: Installation in close proximity to cooking surfaces where the loudspeaker may be directly exposed to cooking oils, such as in commercial cooking environments, may decrease the performance or functionality of the loudspeaker.
Installation PRO.BOSE.COM Important Mounting Information r q Bracket lock tabs: Used to secure the loudspeaker angle. w Grille release tabs: Used to secure the grille to the loudspeaker. e Lock forks: Used to secure the loudspeaker to the mounting bracket. r Angle labels (on bracket): Identify your desired angle position. w w e e q q w Installing the Loudspeaker WARNING: Failure to follow the steps below could lead to an unsafe mounting condition, which could create a falling hazard. 1. 2. 3. 4.
Installation PRO.BOSE.COM Adjusting the Logo Attaching the Grille You can rotate the Bose logo to align with your loudspeaker orientation. With one hand, press the button on the back of the grille. Rotate the logo with the other hand. The logo can be rotated clockwise or counterclockwise. Note: Do not pinch the button inward unless you intend to remove the logo. Place the grille over the front of the loudspeaker and push it firmly until it snaps into place.
©2019 Bose Corporation, All rights reserved. Framingham, MA 01701-9168 USA PRO.BOSE.COM AM837255 Rev.
DesignMax Loudspeakers DMSSE Surface-mount Loudspeaker PROFESSIONAL
© 2019 Bose Corporation, All rights reserved. Framingham, MA 01701-9168 USA PRO.BOSE.COM AM847972 Rev.
TECHNICAL DATA DesignMax DM5SE surface-mounted loudspeaker Product Overview With coaxial two-way drivers, the 60-watt DesignMax DM5SE loudspeaker offers rich lows and clear, intelligible highs — along with premium aesthetics that complement any commercial sound installation. The DM5SE features a two-way 5.25-inch woofer and 1-inch coaxial tweeter mounted within the Dispersion Alignment system, delivering a frequency range of 65 Hz – 20 kHz.
DesignMax DM5SE surface-mounted loudspeaker PHYSICAL Enclosure Material Engineered plastics, highly UV fade resistant Bracket Material Powder-coated steel Grille Perforated aluminum with a powder coat finish, tamper-resistant design, paintable Logo Rotatable, removable Color Black: RAL 9005, White: Bose Arctic White, similar to RAL 9003, Paintable Environmental / Ingress-Protection Outdoor per IEC 529 IP55 (suitable for use outdoors in wet locations), includes aluminum grille to prevent red corro
DesignMax DM5SE surface-mounted loudspeaker SPL (dB) On-Axis Frequency Response 100 95 90 85 80 75 70 65 60 55 50 Bose EQ Voicing Raw (HPF only) 20 100 Frequency (Hz) 1000 10000 20000 Impedance Ohms 100 10 1 20 100 1000 10000 20000 1000 10000 20000 Frequency (Hz) Beamwidth 6 Angle (degrees) 360 100 Horizontal Vertical 10 20 100 Frequency (Hz) For additional specifications and application information, please visit PRO.BOSE.COM. Specifications subject to change without notice.
DesignMax DM5SE surface-mounted loudspeaker Dimensions For additional specifications and application information, please visit PRO.BOSE.COM. Specifications subject to change without notice. 09/2020 PRO.BOSE.
