Owner's Manual

15
Installation
pro.Bose.com
4.
Attach the 502
®
A loudspeaker to the U-bracket. Rotate the loudspeaker to the desired angle and insert the
t humbscrew into the locking bracket.
BOSE CORPORATION, FRAMINGHAM, MA 01701-9168
MADE IN USA
PARALLEL INPUT
PT143722
DOMS/N
Pa n aray System
502A Contro lle d Array
TM
TM
REFER TO OW N ER’ S M A NUAL FOR
PROPER INSTA LLATION AND
OPERAT IN G PROCEDURES
MUST BE USED W ITH 502C SYS T EM CO N TROLLER
NOMINAL IMPEDANCE
POWER HANDLING (IEC)
FUSE
8
450W (MAX)
4A T
®
+––+
M8 x 20 mm
M5 x 10 mm
5. Make sure the safety cable is installed.
Safety cable
WBP-5 wall-mount kit (for indoor use only)
M8 x 25 mm M6 x 25 mm M8 x 16 mm (5)
1. Choose a mounting location that will safely support the weight of the loudspeaker (6.8 kg (15 lb)). Refer to “Guidelines
for permanent installation of Bose
®
Panaray
®
loudspeakers” on page 3.
CAUTION: Choose a position and mounting method consistent with local building codes and regulations. Ensure the mounting
surface and the method of attaching the loudspeaker to the surface is structurally capable of supporting the weight of the
loudspeaker. A 10:1 safety weight ratio is recommended.
CVT-5 transformer kit (for indoor use only)