Owner's Manual
Table Of Contents
- L1 Pro32 Portable Line Array
- Owner's Guide
- Contents
- Important Safety Instructions
- Overview
- Setup
- Connections and Controls
- Assembling the Power Stand and Array
- Connecting Power and a Sub1/Sub2
- Connecting Sources
- Additional Adjustments
- Setup Scenarios
- Musician (with Sub)
- Musician with Mobile Device (with Sub)
- Band (with Sub)
- Musician with T8S Mixer (with Sub)
- Musician (with Analog Sub Connection)
- Musician Stereo with T4S Mixer (with Two Subs)
- DJ Stereo (with Two Subs)
- DJ Mono (with Two Stacked Subs)
- DJ Mono (with Two Stacked Cardioid Subs)
- DJ Stereo (with Four Stacked Subs)
- Musician Dual Mono (with Two Subs)
- Musician with S1 Pro Monitor (with Sub)
- Care & Maintenance
- Care & Maintenance
- Quick Start Guide
- Important Safety Instructions
- Firmware Update
- Owner's Guide
- Subl & Sub2 Powered Bass Modules
12 • English L1 Pro32 Portable Line Array • Owner's Guide
PRO.BOSE.COM
Setup
Setup Scenarios
The L1 Pro32 can be placed on the floor or on an elevated stage (see Assembling the Power
Stand and Array on page 7).
WARNING: Do not place the equipment in an unstable location. The equipment could
become unstable leading to a hazardous condition, which could result in injury.
CAUTION: The power stand should not be placed anywhere that may block the
ventilation holes at the rear/bottom of the L1 Pro32. Operating directly on sand or grass
could cause debris to enter the product through vent openings and result in the L1 Pro32
not functioning properly.
L1 Pro32
All of the following setup scenarios require at least one Sub1 or Sub2 bass module. For proper Sub1/Sub2
settings, see the Sub1/Sub2 owner's guide at PRO.BOSE.COM.
Musician (with Sub)
MUTE MUTE
INST INST