Operation Manual

ɛ ɛ ɛ ɛ
ɛ ɛ ɛ ɛ
ɛ ɛ ɛ
ɛ ɛ ɛ
{c {c
ɛ ɛ ɛ ɛ
ɛ ɛ ɛ ɛ
ɛ ɛ ɛ
ɛ ɛ ɛ
{c {
ɛ ɛ ɛ
ɛ ɛ ɛ ɛ
ɛ ɛ
ɛ ɛ
8c 8c
â
LF
LF
LF
I
÷/
: O :
: O
{
8
:
{
/
ʑ


ʑ
ʑ
a
þ
c
7c
« >
c
#
a
a
a
a {
a
a
10
Finish in
When you select a programme, the respective programme duration is displayed. You can delay
the start of the programme before it begins. The finish-in time indicates when the programme will
be finished. It can be set in hour increments up to a maximum of 24 h.
Press and hold the Finish in button until the required number of hours is shown (h=hour).
Select Start/Reload $, theâdoor is locked.
cSpin speed
You can change the indicated spin speed. The maximum spin speed which can be selected
depends on the chosen programme. If is selected, the load is held in the rinsing water.
{ Dry
You can activate, deactivate and set the drying function by touching this option button. Mode
ofâwashing and drying without interruption is auto dry only; when single drying programme
isâselected, you can choose auto dry, or time dry with desired drying time. aPage 8
ʑ
Additional functions
See also Programme overview aPage 7
7 Prewash For heavily soiled laundry. Prewash at max. 30°C.
2
Rinse Plus
Additional rinse cycle. Prolonged programme duration. For
areas with very soft water or for further improving the washing
result.
S
Less Iron
Special spin sequence with subsequent fluffing. Gentle final
spin  residual moisture in the laundry increased slightly.
ccIntensive
Extends the washing time for a more intensive washing
ofâheavily soiled items.
ʑ
Start/Reload $
For starting or pausing the washing/drying programme.
ʑ
Signal volume (for button signal and information signal)
ʑ
Childproof lock # Programme will not be changed by accidental operation.
To activate the childproof lock:
After the programme starts or finish in time being activated aPage 10, press and hold the
Finish in button for 5 seconds.;
Release when the # symbol lights up. If button signal is on, an acoustic signal will be heard.
When the programme ends, the Start/Reload $ indicator remains on to remind you to
deactivate the childproof lock.
To deactivate the childproof lock:
Touch the Finish in
button until the # symbol turns off.
Release the button.
# symbol flashes if the programme has been changed while childproof lock is activated.
Ifâthe childproof lock is deactivated while the programme selector is in a different position from
when the childproof lock was activated, the running programme will be halted.
Set to  Press and
hold
1 step
clockwise
Button signals Information signals
Set volume* Set volume*1 step
clockwise
Set to Â
1. Start signal mode
2. Set volume for ...
Release
#
*If required, set repeatedly
1 step
clockwise
direct
Additional functions and Individual settings
ʑ
ʑ
$
a
ʑ
â
a
a
a
a
ʑ
$
ʑ
a
ʑ
ʑ
S a
a
ʑ
ʑ
~
a
ʑ
.
ʑ
ʑ
a
a
ʑ
ʑ
ʑ
«
ʑ
ʑ
. :
ʑ
â
ʑ
a
. :
ʑ
a {
a
ʑ
â
â
a
ʑ
ʑ
Â
Â
a