Operation Manual

Transport, e. g.

whenmoving

Before transporting the washer-dryer:

– Turn off the tap.

– Reduce the water pressure in the water inlet hose

(refer to page 45).

– Drain any residual washing solution (refer to page

44.)

– Disconnect the washer-dryer fror the mains.

– Dismantle the supply and drainage hose.

– Install transportation protection devices.

Having transported the appliance and ensured proper

installation and connection, allow the Drain [

programme to run through before starting the first

wash programme.

Transporting the washer-dryer:

Preparing and inserting the

transport bolts

■ Remove the 4 covers C.

■ Remove the rear cover D and prepare the transport

bolts.

■ Insert and tighten the transport bolts.