Program table

ManualsBrandsBosch ManualsDomestic AppliancesWTE83100IL

c  @c c

I

| c÷@c

+ @

 @



Z

a  +c |

 a

Technical data

Dimensions (DxWxH) 60 x 60 x 85 cm (height adjustable)

Weight approximately 45 kg

Max. capacity 7 kg

Condensate container 4.2 l

Connection voltage

Connected load

Fuse protection see appliance rating plate

Ambient temperature

Product number/

Production number

You can find the rating plate on the back of the dryer.

Consumption values table (The value on the label is achieved at the maximum heat setting.)

Fabrics/

programmes

Residual moisture in the

fabrics after spinning

Drying time** Energy consumption**

LCottons 7 kg 10 A 16 A 10 A 16 A

+ Cupboard Dry* 1400 U/min (50%) 112 min 89 min 3.36 kWh 3.36 kWh

1000 U/min (60%) 131 min 104 min 3.92 kWh 3.92 kWh

800 U/min (70%) 150 min 120 min 4.48 kWh 4.48 kWh

|Iron Dry* 1400 U/min (50%) 93 min 69 min 2.42 kWh 2.42 kWh

1000 U/min (60%) 111 min 82 min 3.06 kWh 3.06 kWh

800 U/min (70%) 130 min 94 min 3.70 kWh 3.70 kWh

I÷Sinthetics 3.5 kg

+ Cupboard Dry* 800 U/min (40%) 48 min 42 min 1.35 kWh 1.35 kWh

600 U/min (50%) 60 min 51 min 1.65 kWh 1.65 kWh

* Programme setting for testing in accordance with applicable standard DIN EN61121.

** The values may differ from those specified, depending on the type of fabric, composition of

laundry to be dried, residual moisture in the fabric, the degree of dryness that has been sen and

amount of laundry being loaded.

Optional accessories (from after-sales service using order number, depending on model)

Connection fittings for condensation outlet

The condensation is conveyed directly via a hose.

WTZ

1110

What to do if ...

If you cannot rectify a fault yourself (e.g. switching off/on), please contact our after-sales service. We will

always find an appropriate solution and will avoid unnecessary visits by engineers. Trust the expertise of

the manufacturer and rest assured that the repair will be carried out by trained service technicians using

original spare parts. The contact details of your local after-sales service can be found in the enclosed

after-sales service directory.

When contacting the after-sales service, please quote the appliance's product number (E no.) and

production number (FD) (see the inside of the door).

Set the programme selector to Off and remove the appliance plug from the socket.

The  Start/Stop indicator lamp does

not light up.

Mains plug plugged in? Programme selected?

Check the socket fuse.

The display panel light and indicator

lights (depending on model) go out

and the Start/Stop indicator light

flashes.

Energy-saving mode is activated a see the separate Energy-

saving mode instructions.

The Í Container and  Start/Stop

indicator lights are flashing.

Empty the condensate container.

If featured, check hose for condensation outlet.

The n Filter and  Start/Stop

indicator lights are flashing.

Clean the fluff filter and/or air cooler under running water

a Page 4/6.

Dryer does not start.  Start/Stop button selected?

Door closed?

Programme set?

Ambient temperature greater than 5°C?

Water is running out. Align dryer horizontally.

Clean air cooler seal.

The door opens by itself. Push the door closed until you hear it engage.

Creasing. Laundry load exceeded?

Remove articles of clothing immediately after the end of

the programme, hang up and pull into shape.

Unsuitable programme selected a Page 7.

Laundry is not dried correctly or is still

too damp.

After the end of the programme, warm laundry feels damper

than it actually is. Spread the laundry out and allow the heat to

disperse.

Finely adjust the dryness level – this extends the drying time but

does not increase the temperature. Your laundry will become

drier.

Select a programme with a longer drying time or increase the

drying level. This does not increase the temperature.

Select a time programme for extended drying of laundry that is

still damp.

If you have exceeded the maximum load for the programme,

the laundry may not be dried correctly.

Clean the moisture sensor in the drum. A fine layer of limescale

may adversely affect the performance of the sensors and your

washing will not dry properly.

Drying has been interrupted as a result of a power cut, because

the condensate container is full or because the maximum drying

time has been exceeded.

Drying time too long. Rinse the fluff filters under running water a Page 4.

Insufficient supply of air a ensure that air can circulate.

Air inlet possibly blocked a Clear inlet a Page 8.

Ambient temperature higher than 35 °C a ventilate the room.

The humidity in the room increases

significantly.

Make sure the room is sufficiently ventilated.

Power failure. Remove laundry from the dryer immediately and spread out. This

allows the heat to dissipate. Be careful as the door, the drum and

the laundry may be hot.

One or more indicator lights for

programme status are flashing.

Clean filter and air cooler a Page 4/6.

Check installation conditions a Page 8.

Switch off, leave to cool down, switch on again, restart

programme.

a