Specifications

Intercom Talk Key:

The talk key can be used in both momentary

PTT (push-to-talk) and latching (hands-free talk) mode.

Momentary Mode -

Press and hold the TALK button, then

speak into the microphone. The green

talk LED remains lit while the TALK

button is held. Release the TALK button

when finished talking. The talk LED

will turn off.

Latching Mode for Hands-free Conversation -

Tap the TALK button (do not press and

hold). The green talk LED turn on and

remains on. When finished talking, tap

the TALK button again. The talk LED

turns off.

Dynamic-Mic Headset Connector -

The dynamic-mic headset connector is a 4-pin male XLR

connector. It accepts headsets with monaural headphones

and either a balanced or unbalanced dynamic microphone.

Volume Control -

The volume control adjusts intercom volume to

headphones.

Audiocom/Clear-Com Selector Switch -

The selector switch sets the intercom station for

compatibility with either Audiocom or Clear-Com channel

connector pin-outs, channel power requirements, and call

signaling requirements.

Configuration DIP Switches -

The DIP Switches are provided to enable/disable the

following features:

Mic Kill -

With this feature activated, the station’s

microphone may be turned off from a

remote master controller.

93507621000 WM10002000UserManual.book Page 4 Monday, April 27, 2009 3:09 PM