Specifications

EN | 92 Installation and Operating Manual | VIP X1600
Configuration using a Web Browser Bosch Security Systems | 2006-03 | V2.0
If the LED of the corresponding VIP X1600 module on the front side of the
VIP X1600 is showing red, the upload has failed and you need to repeat the
upload. To perform the upload you must now switch to a special page:
– In the address bar of your browser, after the VIP X1600 module's IP address
enter /main.htm (for example 192.168.0.16/main.htm).
– Repeat the upload.
Configuration download:
You can save configuration data for the VIP X1600 module on a computer and
then load saved configuration data from a computer to the unit.
– Click the Download button. The computer displays a dialog box.
– Follow the on-screen instructions to save the current settings.
Configuration upload:
– Enter the full path of the file to upload or click Browse... to select the required
file.
– Make certain that the file to be loaded comes from the same device type as
the unit you want to reconfigure.
– Next, click Upload to begin transferring the file to the unit. The progress bar
allows you to monitor the transfer.
Once the upload is complete the new configuration is activated. The time
remaining is shown by the message going to reset Reconnecting in ... sec-
onds. The unit restarts automatically once the upload has successfully com-
pleted.