Specifications

VIP X1600 | Installation and Operating Manual EN | 81
Bosch Security Systems | 2006-03 | V2.0 Configuration using a Web Browser
Camera ID:
If necessary, enter the ID of the peripheral you wish to control (for example a
dome camera or pan/tilt head).
Note
If you are using a Bosch AutoDome, remember that the value of the Cam-
era ID must always be selected one less than the Bosch camera number
(for example: Bosch camera number: 1, Camera ID: 0).
Baud rate:
Select the value for the transmission rate in bit/s.
Data bits:
The number of data bits per character cannot be changed.
Stop bits:
Select the number of stop bits per character.
Parity check:
Select the type of parity check.
Interface mode:
Select the desired protocol for the serial interface.
Half-duplex mode:
Choose the setting appropriate for your application.