Specifications

EN | 62 Installation and Operating Manual | VIP X1600
Configuration using a Web Browser Bosch Security Systems | 2006-03 | V2.0
Alarm recording
You can specify the times during which images from the cameras selected
should be recorded in the event of an alarm.
In a similar manner to continuous recording, separate selection fields are avail-
able for each partition, and consequently for each camera input. You can select
up to 16 individual recording time intervals for each day of the week. Alarm
recording occurs only during the highlighted time intervals.
Note
If a time interval has already been selected for continuous recording, you
cannot select it for alarm recording (see Continuous recording,
page 61).
Caution
Alarm tracks must be set up in the required partition for alarm recording
(see Number of alarm tracks, page 63).
The unit uses a special recording mode during alarm recording for optimal usage
of storage capacity: as soon as a time gap for alarm recording begins, a record-
ing is continuously made on one segment, which is the size of a complete alarm
sequence (pre- and post-alarm time).