Specifications

VIP X1600 | Installation and Operating Manual EN | 55
Bosch Security Systems | 2006-03 | V2.0 Configuration using a Web Browser
Partitioning
Four partitions can be set up for recordings of the cameras connected to the
VIP X1600 module, in a similar manner to the partitioning often found on com-
puter hard drives. Parameters such as size, quality and type of video recording
or compression standard used can be specified for each partition. Modifying
these parameters leads to reorganization, during which stored data is lost.
The unit requires a dedicated partition for the recordings of each connected
camera. Each partition is linked to its own encoder or camera input: camera
input Video 1 with partition number 01, camera input Video 2 with partition 02
etc. This assignment cannot be modified. As a result, all numbers are always
displayed in the list, regardless of whether a corresponding partition is available
or has been deleted. All four potential partitions need to be configured in order
to record four cameras. Four partitions are already preconfigured in the default
configuration.
All partitions are listed in the table on the page Partitioning together with their
partition name, number, quality type and size.
In addition, the page provides you with an overview of the drive data; for exam-
ple total memory and number of partitions created. A pie chart indicates how
much memory space is partitioned for recordings.