Specifications

Installation Bosch Security Systems | 2006-03 | V2.0
EN | 24 Installation and Operating Manual | VIP X1600
Network
You can connect the VIP X1600 to a 10/100/1000 Base-T network using a stan-
dard UTP category 5 cable with RJ45 connectors. The second Ethernet inter-
face can be used to create a redundant connection to the network.
Note
You cannot create a connection to a second network.
– Connect the VIP X1600 to the network via the ETH 1 socket.
– Connect the VIP X1600 to a redundant switch or hub on the same network
via the ETH 2 socket.
Direct iSCSI connection
You can connect the VIP X1600 directly to an iSCSI server via the ETH 2 inter-
face. This connection is an alternative to using the second Ethernet interface as
a redundant network connection. Use a UTP category 5 crossed patch cable
with RJ45 plugs for a direct connection to an iSCSI server.
Note
You can obtain a list of compatible iSCSI systems from your supplier or di-
rectly from Bosch Security Systems. This list is constantly being updated
and extended.