Specifications

Operation Bosch Security Systems | 2006-03 | V2.0
EN | 110 Installation and Operating Manual | VIP X1600
Connect on alarm
With the appropriate configuration, a connection between a sender and a
receiver is made automatically when an alarm is triggered (see page 68). After a
short time the live video image from the sender appears on the connected mon-
itor.
This option can also be used to connect a sender and a compatible receiver
using a switch connected to the alarm input. You do not need a computer to
make the connection in this case.
Connecting with a terminal program
Various requirements must be met in order to operate with a terminal program
(see page 119).
– Start the terminal program and enter the command 1 in the main menu to
switch to the IP menu.
– Enter the command 4 in the IP menu to change the remote IP address, then
enter the IP address of the unit you wish to connect to.
– Enter the command 0 to return to the main menu and then enter the com-
mand 4 to switch to the Rcp+ menu.
– In the Rcp+ menu, enter the command 5 to activate the automatic connec-
tion.
Closing the connection with a terminal program
– Start the terminal program (see page 119) and enter the command 4 in the
main menu to switch to the Rcp+ menu.
–In the Rcp+ menu, enter the command 5 to deactivate the automatic connec-
tion.