Spec Sheet

Protection on Power
Output (Arm Power
Supply)
Peak current 21.4 A, peak power 1500 W
(10/1000 μs)
10/100 Ethernet
Data Lines
Peak current 14 A, peak power 200 W
(8/20 μs)
Software Control
Camera Setup/Control Via Internet Explorer Web browser version
7.0 or later, Bosch Configuration Manager
or BVMS
Software Update Firmware upload
Network
Standards H.264 (ISO/IEC 14496‑10), M‑JPEG, JPEG
Streaming A total of four (4) independent streams:
• Two (2) individually configurable H.
264 streams at 4CIF/D1 resolution,
• One (1) H.264, I-frame only stream
(suitable for recording)
• One (1) M‑JPEG stream at 4CIF/D1
resolution
GOP Structure IP, IBP, IBBP
Data Rate 9.6 kbps to 6 Mbps
Overall IP Delay 240 ms
Resolution (Horizontal x Vertical, PAL/NTSC)
• 4CIF/D1 704 x 576/480 (50/60 ips
4
)
• CIF 352 x 288/240 (50/60 ips
4
)
4. Depending on picture content and movement
Ethernet 10-Base T/100 Base-TX, auto-sensing, half/
full duplex, RJ45
Protocols RTP, Telnet, UDP, TCP, IP, HTTP, HTTPS,
FTP, DHCP, IGMP V2/V3, ICMP, ARP, SMTP,
SNTP, SNMP v3, RTSP, 802.1x, iSCSI,
DynDNS, UPnP, IP v4/6, QoS, SSH, SSL
Audio
• Standard G.711, 8 kHz sampling rate
L16, 16 kHz sampling rate
• Signal-to-
Noise Ratio
>50 dB
• Audio
Streaming
Full Duplex / Half Duplex
Fiber Optic Kit
VG4-SFPSCKT
Description Fiber Optic Ethernet Media Converter kit
5
.
Requires a small form-factor pluggable (SFP)
module (sold separately).
Data Interface Ethernet
Data Rate 10/100 Mbps
IEEE 802.3 Compliant
Full Duplex or Half Duplex Electrical Port
Full Duplex Optical Port
Compatible Receiver CNFE2MC
Installation Installed inside a VG4-A-PA0, VG4-A-PA1,
VG4-A-PA2, VG4‑A‑PSU1, or a VG4‑A‑PSU2
power supply box with supplied mounting
hardware
5. Kit available separately and must be installed inside the AutoDome power supply box.
SFP Modules
Description Interchangeable modules available for use
with MMF or SMF optical fiber.
Data Interface Ethernet
Data Rate 10/100 Mbps
IEEE 802.3 Compliant
Mechanical
Dimensions (LxWxH)
• SFP-2 and SFP-3 55.5 x 13.5 x 8.5 mm (2.2 x 0.5 x 0.3 in.)
• SFP-25, SFP-26 63.8 x 13.5 x 8.5 mm (2.5 x 0.5 x 0.3 in.)
Weight (all SFP modules) 0.23 kg (.05 lb)
Type Connec
tor
Wavelength
(transmit/receive)
Max.
Distance
SFP-2 MMF Duplex
LC
1310 nm /
1310 nm
2 km
(1.2 miles)
SFP-3 SMF Duplex
LC
1310 nm /
1310 nm
20 km
(12.4 miles)
SFP-25 MMF Single
SC
1310 nm /
1550 nm
2 km
(1.2 miles)
SFP-26 MMF Single
SC
1550 nm /
1310 nm
2 km
(1.2 miles)
Fiber Compatibility
Optical Fiber Compatibility,
MMF
50/125 µm MMF. For 50/125 µm
fiber, subtract 4 dB from the specified
optical budget value. Must meet or
exceed fiber standard ITU-T G.651.
Optical Fiber Compatibility,
SMF
8–10/125 µm SMF. Must meet or
exceed fiber standard ITU-T G.652.
Optical Distance
Specifications
Specified transmission distances are
limited to the optical loss of the fiber
and any additional loss introduced by
connectors, splices, and patch panels.
The modules are designed to operate
over the entire optical loss budget
range, so they do not require a
minimum loss in order to operate.
Miscellaneous
Sectors/Titling 16 independent sectors with a 20-character
title/sector
Masking 24 individually configurable privacy masks
6 | AUTODOME 700 Series IP PTZ Camera