Installation Guide

68 en | Cable and Wire Standards AutoDome 100 Series Fixed Camera
F.01U.217.818 | 1.0 | 2011.04 Installation Manual Bosch Security Systems, Inc.
10. Ensure that the VG5 AutoDome is set to receive RS232 commands.
– Remove the bubble from the VG5 AutoDome housing.
– Locate the protocol switch on the CPU board.
– Ensure that the protocol switch is in the left position for RS232 operation.
Figure 5.9 Position of CPU Switch for RS232 Operation
11. Return the bubble to the AutoDome housing.
12. Return power to the power supply box.
1 Switch Location
2LEDs
3 Move Switch to the left for RS232 Operation
4CPU Module