Installation Guide

AutoDome 100 Series Fixed Camera Installing the In-Ceiling Mount | en 59
Bosch Security Systems, Inc. Installation Manual F.01U.217.818 | 1.0 | 2011.04
3. Tighten the two (2) Thumbscrews to secure the Interface Box to the housing.
Figure 4.10 In-Ceiling Housing and Interface Box
1 Interface Box 4 Thumb Screw
2 Ball Stud 5 Tether Point
3 In-ceiling Housing 6 Ceiling Clamp
CAUTION!
The In-ceiling dome is provided with tether points on each side of the housing. To prevent
injury, attach a safety wire from a secure anchor point above the ceiling to a tether point on
the dome housing, refer to Figure 4.11, Page 60, below for an illustration of this process.