Installation Guide

AutoDome 100 Series Fixed Camera Installing the In-Ceiling Mount | en 55
Bosch Security Systems, Inc. Installation Manual F.01U.217.818 | 1.0 | 2011.04
5. Tighten the four (4) securing screws to the Bracket Assembly.
Figure 4.4 Tighten Bracket Securing Screw
6. Secure the Bracket Assembly to an overhead securing point with a safety wire.
Figure 4.5 Secure Bracket Assembly
4.6 Wire the Interface Box
The Interface Box can be wired through the top or side. Use the supplied rubber plug to seal
the hole which will not be used to route wires.
Figure 4.6 Interface Box Connections
DATA IN/OUTDATA IN/OUT
ALARM IN
P105P105
P104P104
P102
P103
ANALOG IN RELAYANALOG IN RELAY
ALARMS OUT
J101J101
J102
24V
AC
24VAC
P101
SIG GNDSIG GND
TXD (-)TXD (-)
RXD (+)RXD (+)
+ C+ C
- C- C
NCNC
NONO
COMCOM
AGNDAGND
A2A2
A1
FIBER OPTICSFIBER OPTICS
J103J103
ETHERNET OR UTP VIDEO
DOME POWER
COAX VIDEO
A3
A4
A5
A6
A7
AGND
AGND
OUT3
OUT2
OUT1