Installation Guide

AutoDome 100 Series Fixed Camera Installing the In-Ceiling Mount | en 53
Bosch Security Systems, Inc. Installation Manual F.01U.217.818 | 1.0 | 2011.04
4.3 Dimensions
Figure 4.1 In-ceiling Dimensional Outline
4.4 Prepare Drywall Ceiling for Installation
1. Choose the desired location to mount the dome.
2. Use the bracket Base Plate as a template cut a 7 in. hole with a tolerance of ±1/8 in.
(177.8 mm ±2.2 mm) hole in the ceiling with a drywall utility saw or Jig Saw. Proceed to
Section 4.6 Wire the Interface Box, page 55, for further instructions.
mm
inches
210.7
8.30
19.0
0.75
153.9
6.06
150.2
5.91
94.0
3.70
176.8
6.96
204.3
8.04
DIA.