Technical data

Fig.9-16: Test field for checking the keyboard
This register is used for checking the keyboard.
On pressing a key the asigned virtual key code (HEX) and the event "press‐
ed" is displayed.
On releasing a key the assigned virtual key code (HEX) and the event "re‐
leased" is displayed.
9.5.4 Saving Data
The saving of data must be carried out in the "FlashDrv" directory. The content
of other directories is not saved on switching off.
9.5.5 Transmission of Data
For information about this, see chapter 9.4 "Remote Software ActiveSync" on
page 65.
70/80 Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraControl VCH 08.1 | Project Planning Manual
Software
Transmission via ActiveSync