Technical data

Fig.9-6: Network settings
The network parameters are automatically assigned via DHCP.
The network parameters must be manually configured.
The following data is required:
● IP Address:
Manual input of the device's IP address.
● Gateway:
Manual input of the Gateway.
● Subnet Mask:
Manual input of the Subnet Mask.
Fig.9-7: Visualization and communication settings
The visualization software can reside locally on the IndraControl VCH 08.1 or
on the control to be visualized.
62/80 Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraControl VCH 08.1 | Project Planning Manual
Software
Obtain an IP Address via DHCP
Specify an IP Address
Visualization Data Source