Technical data

Connection Example with PILZ PST1 Monitoring Device
Suggestion for connection: Wiring of the enabling switches for safety
category
3 and a PILZ monitoring device. Please also refer to the oper‐
ating manual by PILZ for the PST1 device.
Fig.7-13: Connection Example with PILZ PST1 Monitoring Device
● Only with both enabling circuits connected "simultaneously" (by actuation
of an enabling switch), do the two output relays K1 and K2 switch to the
operating position and the output contacts 13-14 and 23-24 close.
48/80 Bosch Rexroth AG | Electric Drives
and Controls
Rexroth IndraControl VCH 08.1 | Project Planning Manual
Pin Assignments of the IndraControl VCH 08.1
Functional Sequence