Technical data

Standard Meaning
EN 61131-2:2003 chapter 4 programmable logic controllers
– part 2: requirements and tests
EN 50178 configuration of power installations with electronic operating equipment
EN 50173-1:2002 information technology - application independent communication cable systems
ISO/IEC 11801:2002 information technology – generic cabling for customers premises
Fig.4-10: Applied standards
All CE requirements are fulfilled concerning supplied IndraControl
VCH 08.1.
The hand-held terminal IndraControl VCH 08.1 device is certified according to
● UL508 (Industrial Control Equipment) and
● C22.2 no. 142-M1987 (CSA)
It
is possible, however, that there are combinations or extension stages for
which the certification is either restricted or missing. For this reason please
verify the registration by referring to the UL marking on the device.
To guarantee UL/CSA-compliant operation, the following conditions
must be fulfilled:
●
Only use 140/167 F insulated copper wire.
● All connections must be protected by a 2 A time-lag safety
fuse.
The UL/CSA marking is only valid for the device as in its delivery
status. The UL compliancy must be verified subsequent to modifi‐
cations to the device.
4.11 Compatibility Test
All
Rexroth controls and drives are developed and tested according to the latest
state-of-the-art of technology.
As it is impossible to follow the continuing development of all materials (e. g.
lubricants in machine tools) which may interact with our controls and drives, it
cannot be completely ruled out that any reactions with the materials used by
Bosch Rexroth might occur.
For this reason, before using the respective material a compatibility test has to
be carried out for new lubricants, cleaning agents etc. and our housings / our
housing materials.
Project Planning Manual | Rexroth IndraControl VCH 08.1 Electric Drives
and Controls
| Bosch Rexroth AG 21/80
Technical Data
UL/CSA Certification