Instruction manual

UML-202-90 Installing the UML-202-90 | en 17
Bosch Security Systems, Inc. Instruction Manual F01U076723 | 1.0 | 2007.09
6.4 Connecting the Y/C (S-Video) Signal to the Monitor
There is one (1) mini-DIN type connector for the S-Video (Y/C) input (see Figure 6.2 on page
17) on the rear side panel.
NOTE: Both Y and C inputs are terminated with 75 ohm.
Fig. 6.2 Y/C Connection Pinout
6.5 Connecting Audio to the Monitor
There are two (2) sets of mono audio connectors for audio input.
– All audio inputs are active loop-through.
– Audio 1 is associated with Video 1 or Y/C; Audio 2 is associated with Video 2.
6.5.1 Connecting PC Audio
The rear bottom panel has PC stereo audio IN and audio OUT. Connect with 1/8 in. mini phono
plug jack to Audio IN.
6.6 Connecting the PC Signal to the Monitor
There are three ways to connect the PC signal to the monitor.
6.6.1 HDMI
The monitor can be connected to the HDMI (High Definition Multimedia Input) by connecting a
HDMI cable (not supplied).
Fig. 6.3 HDMI Input
Reference Input
1GND
2GND
3 Y-signal IN or OUT
4 C-signal IN or OUT
Reference Audio 1 Audio 2
Video 1 X
Video 2 X
S-video X