Instruction manual

UML-202-90 Installing the UML-202-90 | en 15
Bosch Security Systems, Inc. Instruction Manual F01U076723 | 1.0 | 2007.09
6 Installing the UML-202-90
This chapter outlines the procedures needed to install the UML-202-90 Series. A qualified ser-
vice person should install the monitor and adhere to all local codes.
The UML-202-90 monitor is delivered with a 3-pole US-style power cord and a 3-pole Euro-
style power cord. Use the US-style power cord where 120 VAC, 60 Hz power is available; and
use the Euro-style power cord where 230 VAC, 50 Hz power is available. The monitor automat-
ically adjusts to either power input voltage.
6.1 Ventilation
To prevent overheating, ensure that the ventilation openings on the rear of the monitor are not
covered.
6.2 Mounting the UML-202-90
The UML-202-90 is designed to be used on a desktop or mounted to a wall or rack.
6.2.1 Desktop Installation
The viewing angle of the LCD can be adjusted to fit the most comfortable monitoring status.
Min Degree Max Degree
25
o
122 mm 50
o
192 mm
i
NOTICE! For the best viewing quality and holding support, the suggested bracket angle is 25°
to 50°.