Owner's manual

8
Robert Bosch Hausgeräte GmbH
en
Controls and Displays
(see the illustration at the beginning of this
instruction manual)
ON / OFF switch (1)
The ON / OFF switch is the main power
switch for the machine. You use it to turn
on your TASSIMO machine or turn it off
completely.
i Note:
To save even more energy, the appliance
should be switched off after each use.
Start / Stop button (2)
The Start / Stop button is used to start
and interrupt the brewing, cleaning and
descaling processes.
Drink adjustment buttons
+ (2a) and - (2b)
You use the drink adjustment buttons
to adjust the size of the drink you are
preparing.
2a Makes a larger / longer drink
(milder avour)
2b Makes a smaller / shorter drink
(stronger avour)
+
LED (3a) and
−
LED (3b)
These LEDs light up when the T DISC has
been detected. The
+
and
−
LEDs light up
individually according to whether a bigger
or smaller drink has been selected and
ash during the brewing process.
Status LED F (3c)
The Status LED indicates four machine
conditions:
– Steady orange:
Machine is in standby mode
– Blinking orange:
Machine is in the process of brewing a
drink / cleaning / descaling
– Steady red:
Error mode (for example, if the barcode
was not recognized)
– Dimmed, orange light:
Power save mode
! Risk of scalding!
Wait until the Status LED
F (3c) has
stopped blinking before attempting to
open the brewing unit.
Fill water tank T (3d)
This indicator lights up when the removable
water tank needs to be relled or is not in
place.
Descale required
Q (3e)
This indicator lights up or blinks when your
TASSIMO machine must be descaled.
i Note:
Always descale your TASSIMO machine in
accordance with the instructions provided
under “Descaling” on page 14.
BRITA lter cartridge replacement
indicator (3f)
This indicator reminds you that it is time to
replace the BRITA MAXTRA lter cartridge
(5d).
TAS55_GB-CH.indb 8 11.01.2013 15:09:53