Owner's manual

5
01/2013
en
1. Open the brewing unit by lifting the
handle (4a) and then pushing the
brewing unit up.
2. Place the Service T DISC (6a) on the
T DISC holder (4b) with the barcode
facing down.
Make sure that the  ap of the T DISC is
centred in the slot in the front.
3. Close the brewing unit by  rst bringing
it down.
4. Then push the handle (4a)  rmly to the
machine, until you hear an audible click.
5. Press the Start / Stop button (2) to start
the cleaning process.
6. When the cleaning process is complete,
empty the cup and return it under the
drink outlet.
! Important:
Please complete steps 5 and 6 four
times to ensure the machine is
cleaned and prepared for the next
steps.
7. Open the brewing unit, remove the
Service T DISC and store it in the
compartment (6) at the back of the
machine.
► The next step involves installing the
BRITA MAXTRA water  lter system that
came with your machine. Please follow
the instructions on the next pages.
1. 2.
3. 4.
5. 6.
4 x
7.
TAS55_GB-CH.indb 5 11.01.2013 15:09:51