Owner's manual

16
Robert Bosch Hausgeräte GmbH
en
8. When the Status LED
F and “Descale
required” LED ' stop blinking, the
descaling process is complete. Empty
the receiving container and return it
under the drink outlet.
► Rinse the water tank thoroughly and  ll
up to the max mark with fresh water.
► Replace it back onto your TASSIMO
machine.
9. Open and close the brewing unit
(Leave the Service T DISC in the
T DISC holder).
10. Press the Start / Stop button (2) brie y
to run the cleaning cycle.
11. When the cleaning process is complete,
empty the cup and return it under the
drink outlet.
! Important:
Please complete steps 10 and 11
four times.
Your TASSIMO machine has now been
properly descaled and cleaned.
12. Now open the brewing unit, remove the
Service T DISC and store it in the com
partment (6) at the back of the machine.
8.
9.
10. 11.
4 x
12.
TAS55_GB-CH.indb 16 11.01.2013 15:09:59