Specifications

1st Edition/Revision 6 (2/2/04)

To remove drum drive motors:

• Remove rear panel

• Remove rear tub spring

• Remove drum belt

• Disconnect wire harnesses

• Remove two motor bolts, then pull motor out

toward rear of washer

WARNING: The drum drive motor & tub are grounded

through the motor control. Since the tub is plastic and

the motor is isolated from the frame, Its critical the

ground leads from the tub, drive motor & motor control

are connected properly.

Drum drive

motor

Rear tub

spring

10mm bolts

Disassembly

–

Drum Drive Motor