Interactive User Manual
Table Of Contents
- Dishwasher
- en-us
- Table of contents
- 1 IMPORTANT SAFETY INSTRUCTIONS
- 2 Preventing material damage
- 3 Environmental protection and energy-saving
- 4 Familiarizing yourself with your appliance
- 5 Dishwasher Cycles
- 6 Options
- 7 Features
- 8 Before using for the first time
- 9 Rinse aid system
- 10 Detergent
- 11 Dishware
- 12 Basic Operation
- 12.1 Protection against unintentional operation
- 12.2 Opening the appliance door
- 12.3 Switching on the appliance
- 12.4 Setting a cycle
- 12.5 Setting options
- 12.6 Setting the electronic delay time
- 12.7 Starting the wash cycle
- 12.8 Interrupting the wash cycle
- 12.9 Terminating the wash cycle
- 12.10 Switching off the appliance
- 13 Basic settings
- 14 Home Connect™
- 15 Cleaning and maintenance
- 16 Troubleshooting
- 17 Transportation, storage and disposal
- 18 Customer service
- 19 Technical specifications
- 20 Statement of Limited Product Warranty
en-us Basic settings
30
Basic setting Display
text
Selection Description
Wi-Fi Cn0 Cn0 - Cn1 Switch the wireless net-
work connection on or off.
Level "Cn0" switches the
wireless network connec-
tion off.
The basic setting "Wi-Fi"
is not available until you
have connected the appli-
ance with the HomeCon-
nect™ app.
→
"HomeConnect™ ",
Page31
Remote Start rc1 rc0 - rc2 Activate or deactivate .
The following settings are
possible:
¡ With the setting "rc0",
the option is perma-
nently deactivated.
¡ With the setting "rc1",
the option can be se-
lected via the button.
¡ With the setting "rc2",
the option is perma-
nently activated.
The basic setting is not
available until you have
connected the appliance
with the HomeConnect™
app.
→
"HomeConnect™ ",
Page31
Factory setting rE Starting with
YES
Confirming
with
Restore changed settings
to the factory settings.
The settings for initial use
must be configured.
1
Factory setting (may vary according to model)
13.2 Changing the basic
settings
1. Press .
2. To open the basic settings,
press for 3 seconds.
a The display shows .
3. Press repeatedly un-
til the display shows the re-
quired setting.
4. Press repeatedly until the
display shows the right value.
You can change one or more
settings.