Interactive User Manual
Table Of Contents
- Dishwasher
 - en-us
- Table of contents
 - 1 IMPORTANT SAFETY INSTRUCTIONS
 - 2 Preventing material damage
 - 3 Environmental protection and energy-saving
 - 4 Familiarizing yourself with your appliance
 - 5 Dishwasher Cycles
 - 6 Options
 - 7 Features
 - 8 Before using for the first time
 - 9 Rinse aid system
 - 10 Detergent
 - 11 Dishware
 - 12 Basic Operation
- 12.1 Protection against unintentional operation
 - 12.2 Switching on the appliance
 - 12.3 Setting a cycle
 - 12.4 Setting options
 - 12.5 Setting the electronic delay time
 - 12.6 Starting the wash cycle
 - 12.7 Activating the button lock
 - 12.8 Deactivating the button lock
 - 12.9 Interrupting the wash cycle
 - 12.10 Terminating the wash cycle
 - 12.11 Switching off the appliance
 
 - 13 Basic settings
 - 14 Home Connect™
 - 15 Cleaning and maintenance
 - 16 Troubleshooting
 - 17 Transportation, storage and disposal
 - 18 Customer service
 - 19 Technical specifications
 - 20 Statement of Limited Product Warranty
 
 
en-us Basic Operation
28
¡ To save energy, the appliance
switches off automatically
10minutes after the end of the
wash cycle. If you open the ap-
pliance door immediately after
the wash cycle has ended, the
appliance will switch off after 4
seconds.
12.7 Activating the button
lock
The button lock prevents the ap-
pliance from being operated acci-
dentally or incorrectly while run-
ning.
▶
Press   for approx. 3sec-
onds.
a The button lock is activated and
will be automatically deacti-
vated at the end of the cycle.
a  flashes on the display
when the appliance is running.
a The button lock remains acti-
vated with a power failure.
12.8 Deactivating the
button lock
▶
Press   for approx. 3sec-
onds.
12.9 Interrupting the wash
cycle
1. Press On/Off.
The program is saved and the
appliance switches off.
2. Press On/Off.
3. Press   to resume the wash
cycle.
12.10 Terminating the
wash cycle
To end a cycle early or to switch
from one that has already started,
you will need to cancel it first.
▶
Press   for approx.
4seconds.
a All displays light up.
a As soon as the displays are off,
the display shows "0h:01m"
and the residual water is
pumped out.
a The cycle is cancelled and
ends after approx. 1minute.
12.11 Switching off the
appliance
CAUTION
To avoid risk of injury, always use
caution when opening the door
during or following a wash cycle
as hot water or steam may es-
cape.
▶
Do not fully open the door until
water noises have stopped and
steam has subsided.
1. Please note the information on
Preventing Material Damage.
2. Press On/Off.










