Interactive User Manual

Basic Operation en-us
25
Third rack
Basic Operation
12 Basic Operation
Basic Operation
12.1 Protection against
unintentional
operation
Your appliance is equipped with a
function that helps to prevent un-
intentional operation, e.g. by chil-
dren. After starting the appliance,
the door has to be closed within 4
seconds, otherwise the operation
will be paused.
Note:This function cannot be de-
activated.
Requirements
¡ Pressing Start to begin a wash
cycle
¡ Setting Delay time and press-
ing Start
¡ Opening the door while Delay
time is active
¡ Opening the door during a
wash cycle.
1. Close the door.
2. Press ⁠.
a The wash cycle will resume.
12.2 Switching on the
appliance
▶
Press ⁠.
The standard program is set by
default.
If you do not perform any ac-
tions on the appliance for 10
minutes, it will automatically
switch off.
12.3 Setting a cycle
To adjust the wash cycle to the
soiling level of the dishware, se-
lect a suitable cycle.
▶
Press the right cycle button.
a The cycle is set and the cycle
button flashes.
a The remaining run time of the
cycle appears on the display.
12.4 Setting options
You can set options to complete
the chosen cycle.
Note:The available options de-
pend on which cycle is selected.
▶
Press the button for the rele-
vant option.
a The option is set and the option
button flashes.