SDS

ManualsBrandsBosch ManualsDrill Bits & Accessories#6 Countersink with 3/32" Drill Bit

SAFETY DATA

EET

Page 1 of 6

SECTION 1:

IDENTIFICATION OF THE SUBSTANCE OR MIXTURE AND OF THE SUPPLIER

Product

Name: 506 Cut-Off Wheel

Product Description: Abrasive

Catalog Number: 2615110506, 2615400506

Date of issue: February 9, 2016

Manufacturer/Distributor:

Robert Bosch Tool Corporation

1800 W. Central Road

Mt. Prospect, IL 60056

For More

Information

Call:

(Monday-Friday, 8:00 AM– 5:00 PM CST)

Bosch Customer Service

(877) 267-2499

In Case Of Emergency

Call

(24 Hours/Day, 7 Days/Week)

(877) 303-0891

SECTION 2: HAZARDS IDENTIFICATION

N/A

SECTION 3: COMPOSITION/INFORMATION ON INGREDIENTS

Chemical Name Regulated* CAS# Percentage Carcinogen ACGIH/TLV

CBN Diamond NO 10043-11-5 25 NO 10 mg/m3

(as inhalable particles)

*Nickel YES 7440-02-0 15-20 YES 1 mg/m3

*Sodium Hydroxide YES 1310-73-2 NO 2 mg/m3

*Sodium Nitrite YES 7632-00-0 NO Not Listed

1095 Steel N/A

Iron 7439-89-6 5.0 mg/m3

(As iron oxide dust and fume)

Aluminum 7429-90-5 10.0 mg/m3

(as metal

dust)

Copper 7440-50-8 0.1 mg/m3

(as fume)

1.0 mg/m3

(as dusts and mists)

Chromium 7440-47-3 0.5 mg/m3

(as Cr, metal)

Manganese 7439-96-5 0.2 mg/m3

Summary of content (6 pages)

PAGE 1
Page 1 of 6 SAFETY DATA SHEET SECTION 1: IDENTIFICATION OF THE SUBSTANCE OR MIXTURE AND OF THE SUPPLIER Product Name: 506 Cut-Off Wheel Product Description: Abrasive Catalog Number: 2615110506, 2615400506 Date of issue: February 9, 2016 Manufacturer/Distributor: Robert Bosch Tool Corporation 1800 W. Central Road Mt.
PAGE 2
Page 2 of 6 SAFETY DATA SHEET Nickel Molybdenum Silicon 7440-02-0 1.5 mg/m3 (as inhalable fraction Ni metal) 7440-21-3 10 mg/m3 (as MO insoluble compounds, inhalable fraction: 2.0 mg/m3 ( as Mo insoluble compounds, respirable fraction) 0.
PAGE 3
Page 3 of 6 SAFETY DATA SHEET SECTION 5: FIREFIGHTING MEASURES Flash Point: N/AP Explosive Limits: N/AP Extinguishing Media: CO2, Dry Chemicals, Water, Foam Special Firefighting Procedures: None SECTION 6: ACCIDENTAL RELEASE MEASURES Waste Disposal Methods: According to local, state, and federal regulations. Steps to be taken in the event of spills, leaks, or releases: None Applicable. SECTION 7: HANDLING AND STORAGE Normal Storage and Handling. Store in clean, dry areas away from chemicals.
PAGE 4
Page 4 of 6 SAFETY DATA SHEET Engineering Controls: Local exhaust ventilation should be utilized when welding, burning sawing, brazing, grinding, or machining when exposure exceeds occupational exposure limits. Eye Protection: Safety glasses or goggles should be utilized as required by exposure. Other protective equipment should be utilized as required by welding standards. Skin Protection: Wear appropriate personal protective clothing to prevent skin contact with copper dusts or mists.
PAGE 5
Page 5 of 6 SAFETY DATA SHEET Prolonged exposure to nickel may cause contact dermatitis or other allergic reactions especially in sensitive individuals. Chronic Effects: Repeated or prolonged overexposure to copper fumes may cause the skin and hair to change color. SECTION 12: ECOLOGICAL INFORMATION N/A SECTION 13: DISPOSAL CONSIDERATIONS According to local, state, and federal regulations. Recycling should be a consideration.
PAGE 6
Page 6 of 6 SAFETY DATA SHEET Molybdenum Silicon No No Yes No Yes Yes Yes No Yes Yes SECTION 16: OTHER INFORMATION Although Robert Bosch Tool Corporation has attempted to provide current and accurate information herein, Robert Bosch Tool Corporation makes no representations regarding the accuracy or completeness of the information and assumes no liability for any loss, damage, injury of any kind which may result from or arise out of the use of or reliance on the information by any person.