Installation manual

Solution 64
7)
NEW
Arming In Part Mode Via Prox Readers.
In previous versions it was not possible to configure a reader to
only allow arming in Part mode as the reader still required the
“Arming Allowed” option to be enabled.
In this release the arm in part mode via prox reader feature has
been improved and it is now possible to configure a reader to
only allow arming and disarming from part mode.
To configure the reader for part arming only, select option 5 ,
“Part On Arming Allowed” and deselect option 1, “All On Arming
Allowed” in the Reader Options MENU 1-6-3.
On
ce enabled, swiping the token once will arm the area in part
mode 1. If part mode 2 zones have been programmed, swipe the
token a second time within 5 seconds and the area will arm in
part mode 2.
See below for text changes and additional options in the Reader
Options Menu.
Access > Prox Reader >
Reader Options

MENU 1-6-3
1 All On Arming Allowed Y
2 Disarming Allowed Y
3 Enable Badging N
4 Zero Exit Time N
5 Part On Arming Allowed N
6 Arm If Single Area User N
7 Reserved N
8 Reserved N
The above options can be configured independantly for each
prox reader or prox keypad fitted to the system.
i
Note
The following options are included in this release however
their
functionality has been disabled as they are for future
use. Please ignore the following options in this release.
MENU 55 - MY Alarm
MENU 503 - Check Web Email
MENU 504 - Email System Log
MENU 508 -Register Customer
MENU 509 -Register Installer
2 © 2006 Bosch Security Systems
ww
w.boschsecuritysystems.com
BLCC110N1.05 Issue: FTR1.2 4/06
Release Notes Solution 64