Spec Sheet

Fire Alarm Systems | SOLO332 Smoke tester for detectors ≤
5.25" dia
SOLO332 Smoke tester for detectors ≤
5.25" dia
www.boschsecurity.com
u Touch-sensitive, spring-loaded mechanism for
effective, economic aerosol delivery
u Clear cup for viewing detector LED
u Strong and durable modern plastics technology for
long life and minimal weight
u Compatible with SOLO100 and SOLO101 Extension
Poles
Use the SOLO332 Smoke Detector Tester for in-place
testing of smoke detectors up to 5.25 in. (133 mm) in
diameter.
Notice
Testing requires smoke aerosol!
Use FME-SOLOGAS-A10 in the Americas. Use FME-
TEST-SMOKE2 everywhere else.
Parts included
Quantity Component
1 Smoke detector tester
1 Literature pack
Technical specifications
Mechanical Properties
Detector Size Range
1
:
Diameters up to 5.25 in. (133 mm)
Weight:
1 lb 4 oz (567 g)
Working Angle: 0° to >90°
1
Only the sensing chamber needs to be sealed within
the tester cup.
Trademarks
SOLO™ is a trademark of detectortesters (testing technology from No
Climb)
Ordering information
SOLO332 Smoke tester for detectors ≤ 5.25" dia
Tests smoke detectors up to 5.25 in. (133 mm) in
diameter in place using an aerosol designed to
simulate smoke particles.
Order number SOLO332