Data Sheet

Fire Alarm Systems | SOLO330 Smoke Detector Tester
Use the SOLO330 Smoke Detector Tester for in place
testing of smoke detectors using an aerosol designed to
simulate smoke particles.
Certifications and Approvals
Region Certification
USA UL URRQ.S24293 SOLO330
Parts Included
Quant. Component
1 SOLO330 Smoke Detector Tester
1 Literature pack
Technical Specifications
Mechanical
Detector size range
1
(Ø)
99 mm (3.9 in)
Weight 567 g (1 lb 4 oz)
Working angle 0° to 90°
1
Only the sensing chamber needs to be sealed within the
tester cup.
Trademarks
SOLO™ is a trademark of No Climb Products, Ltd
Ordering Information
SOLO330 Smoke Detector Tester
Tests smoke detectors in place using an aero-
sol.
SOLO330
Accessories
SOLO100 Telescopic Access Pole
Enables the installation and replacement of
fire detectors at high ceilings. Expandable
with up to three SOLO101 Fixed Extension
Poles.
SOLO100
SOLO101 Fixed Extension Pole
Enables the installation and replacement of
fire detectors at ceilings. Expandable with
other Fixed Extension Poles.
SOLO101
SOLO610 Test Equipment Bag
Robust bag made of sturdy woven polyester
for carrying and storing test and service prod-
ucts.
SOLO610
SOLO330 Smoke Detector Tester
▶
Touch-sensitive, spring-loaded mechanism for
effective, economic aerosol delivery
▶
Clear cup allows view of detector LED
▶
Strong and durable modern plastics technology for
long life and minimal weight
▶
Compatible with SOLO100 and SOLO101 Poles
www.boschsecurity.com