Data Sheet

Fire Alarm Systems | SOLO200 Detector Removal Tool
With its pivoting grip segments and three different
diameters, the SOLO200 Detector Removal Tool is
suitable for the insertion and removal of most fire
detectors.
The plastic caps ensure secure gripping of fire detectors
and thus also protect the detector surface against
damage.
Functions
Adjustment of detector sizes
The color-coded grips use a pull and twist motion to
rotate to the desired combinations and lock into place to
fit the following detector sizes:
Color combination Detector diameter
Yellow 64 mm to 76 mm (2.5 in to 3 in)
Yellow and red 74 mm to 93 mm (2.91 in to 3.66 in)
Yellow and blue 75 mm to 87 mm (2.95 in to 3.93 in)
Blue 86 mm to 98 mm (3 in to 3.85 in)
Blue and red 92 mm to 105 mm (3.6 in to 4.13 in)
Red 98 mm to 112 mm (3.85 in to 4.4 in)
Universal joint
A universal joint enables detector removal and
replacement even if the detector cannot be accessed from
directly underneath.
Parts Included
Qty. Components
1 SOLO200 Detector Removal Tool
2 Plastic caps for the Detector Removal Tool
Note The SOLO100 Telescopic Access Pole or
SOLO101 Fixed Extension Pole must be
purchased separately.
Technical Specifications
Mechanics
Detector size range (Ø) 64 m to 112 mm (2.5 to 4.4 in)
Weight 1.1 kg (2 lb 7 oz)
Working angle max. 30°
Trademarks
SOLO™ is a trademark of No Climb Products, Ltd.
SOLO200 Detector Removal Tool
▶
Suitable for a wide range of detector sizes
▶
Adjustable color-coded grips rotate to fit different
sized detectors
▶
Universal joint ensures tool remains parallel with
ceiling
www.boschsecurity.com