Register yo new devic ur e on MyBosch now and get free b enefits: bosch-h ome.
aus Table of contents Safety ............................................... 4 General information.......................... 4 Intended use..................................... 4 Restriction on user group................. 4 Safe installation ................................ 4 Safe use ........................................... 6 Damaged appliance ......................... 7 Risk to children ................................ 8 Safety systems ................................. 9 Preventing material damage ...
aus Basic settings................................ 32 Overview of basic settings ............. 32 Changing basic settings................. 33 Home Connect .............................. 33 Home Connect quick start ............. 34 Home Connect settings.................. 34 Remote Start ............................ 34 Remote Diagnostics ...................... 35 Software update ............................. 35 Data protection............................... 35 Technical specifications...............
aus Safety Safety Observe the following safety instructions. General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. Intended use Only use this appliance: ¡ For cleaning household tableware. ¡ In private households and in enclosed spaces in a domestic environment. ¡ Up to an altitude of max. 4000 m above sea level.
Safety aus WARNING ‒ Risk of electric shock! ¡ Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Always use the supplied power cable for the new appliance. ▶ Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing. ▶ The protective conductor system of the domestic electrical installation must be properly installed.
aus Safety Safe use WARNING ‒ Risk of serious harm to health! Failure to comply with safety instructions and directions for use on packagings of detergent and rinse aid products may cause serious harm to health. ▶ Follow the safety instructions and directions for use on the packagings of detergent and rinse aid products. WARNING ‒ Risk of explosion! ¡ Adding solvents to the interior of the appliance may cause explosions. ▶ Never add solvents to the interior of the appliance.
Safety aus WARNING ‒ Risk of tipping! Overfilling the Baskets may cause the appliance to tip up. ▶ Never overfill the Baskets with free-standing appliances. WARNING ‒ Risk of electric shock! ¡ An ingress of moisture can cause an electric shock. ▶ Only use the appliance in enclosed spaces. ▶ Never expose the appliance to intense heat or humidity. ▶ Do not use steam- or high-pressure cleaners to clean the appliance. ¡ If the insulation of the power cord is damaged, this is dangerous.
aus Safety ¡ Incorrect repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance. ▶ If the power cord of this appliance is damaged, it must be replaced with a special connection cable, which is available from the manufacturer or his Customer Service. Risk to children Follow the safety instructions if there are children in your home.
Safety aus WARNING ‒ Risk of chemical burns! Rinse aid and detergent may cause chemical burns to the mouth, throat and eyes. ▶ Keep children away from detergent and rinse aid products. ▶ Keep children away from the appliance when open. The water in the interior of the dishwasher is not drinking water. It may contain residues of detergents and rinse aid. WARNING ‒ Risk of injury! Children may get their fingers caught in the slots of the tablet collecting tray and injure themselves.
aus Preventing material damage Preventing material damage Preventing material damage Preventing material damage Safe installation Follow the instructions when installing the appliance. ATTENTION! ¡ Improper installation of the appliance may cause damage. ▶ If the dishwasher is installed above or below other domestic appliances, follow the information on installation in combination with a dishwasher in the installation instructions for the individual appliances.
Childproof lock Childproof lock Childproof lock The childproof lock lets you protect children from possible hazards resulting from the appliance. The appliance is equipped with a door lock. Childproof lock aus Deactivating the door lock 1. Open the appliance door. 2. Push the catch of the childproof lock to the right and slide it backwards . 1 Door lock The door lock is a mechanical safety system and makes it more difficult to open the appliance door. You can activate or deactivate the door lock.
aus Installation and connection Use the Eco Wash programme. The Eco Wash programme is energy-efficient and environmentally friendly. → "Programmes", Page 17 marks on the appliance. These marks will disappear after the first wash cycle.
Installation and connection aus Drainage connection Electrical connection Connect your appliance to drainage connection so dirty water is discharged via the wash cycle. Connect your appliance to the power supply. Installing the drainage connection 1. Consult the installation instructions supplied for the steps required here. 2. Connect the wastewater hose to the outlet connection of the siphon using the enclosed parts. 3. When doing so, check that the wastewater hose is not kinked, crushed or twisted.
aus Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. 7 6 8 5 9 4 10 3 11 2 12 1 1 1 14 Rating plate Depending on the appliance specifications Rating plate with "E number and FD number" → Page 52. The data you need for "Customer Service" → Page 51.
Familiarising yourself with your appliance 2 Detergent dispenser 3 4 Bottom basket 5 Tablet collecting tray 6 7 8 9 Top basket 10 11 12 1 Lower spray arm Cutlery drawer 1 aus "Detergent" → Page 25 is added to the detergent dispenser. "Bottom basket" → Page 21 The lower spray arm washes the tableware in the bottom basket. If the tableware has not been washed properly, clean the spray arms.
aus Familiarising yourself with your appliance 1 2 3 4 5 12 11 10 9 6 7 8 1 ON/OFF button 2 3 4 5 6 Programme buttons "Switching on the appliance" → Page 30 "Switching off the appliance" → Page 31 "Terminating the programme" → Page 31 Programmes Rinse aid refill indicator "Rinse aid system" → Page 24 WLAN display "Home Connect" → Page 33 Water supply display Display for water supply 7 8 Start button If you press for approx. 3 seconds, you can open the basic settings.
Programmes aus Programmes Programmes You can find an overview of the programmes that can be selected here. Different programmes, which can be found on the control panel of your appliance, are available depending on the appliance configuration. The running time may vary depending on the programme selected.
aus Programmes Programme Glass Wash Quick 1h Machine Care Favourite Consumption values 1) Duration in hrs:mins 2) Energy consumption in kWh 3) Water consumption in litres ¡ 1) 1:40 - 1:45 ¡ 2) 0,750 - 0,800 ¡ 3) 11,5 - 14,0 ¡ 1) 1:00 ¡ 2) 1,200 ¡ 3) 10,0 ¡ ¡ ¡ ¡ ¡ ¡ 1) 2:10 2) 1,350 3) 15,1 1) 0:15 - 0:15 2) 0,050 - 0,050 3) 4,0 - 4,0 Information for test institute Test institutes can request the conditions for comparison tests, e.g.
Additional functions The pre-rinse program is saved to this button at the factory. Pre-rinse is suitable for all types of tableware. The tableware undergoes intermediate cleaning via cold rinsing. When programmes have been downloaded and on delivery of the appliance, the name of the programme will be displayed in the app. The display alternately shows "APP" and the remaining running time. Tip: You can use the Home Connect app to download additional programmes and save them to the button.
aus Features Features Features 3. Press in the levers on the right and left on the outside of the basket. You can find an overview of the possible features of your appliance and how to use them here. These features depend on the model of your appliance. Features Top basket Arrange cups and glasses in the top basket. The basket can then slip down slightly. 4. Raise or lower the basket evenly to the right level.
Features aus Bottom basket Cutlery basket Arrange pans and plates in the bottom basket. Arrange cutlery in the cutlery basket, always without sorting it and with the sharp points downwards. a Cutlery basket 1 Cutlery drawer Arrange cutlery in the cutlery drawer. Large plates up to a diameter of 31 cm can be arranged in the bottom basket as shown. Arrange cutlery with the points and sharp edges downwards.
aus Features Etagere Use the cutlery shelf and space underneath for small cups and glasses or for large items of cutlery, e.g. cooking spoons or serving cutlery. 1. Push the lever forwards down the prongs and fold . 1 2 2. To use the prongs again, fold them back up. a The prongs audibly click into position. If you do not need the cutlery shelf, you can fold it up. Baking sheet spray head Folding prongs Use the baking sheet spray head to clean large items of tableware, e.g.
Features Inserting baking sheet spray head Use the baking sheet spray head instead of the top basket to clean large trays, grilles and plates. 1. Remove top basket. 2. Insert the baking sheet spray head in the holder and turn to the right . aus Removing baking sheet spray head If you no longer require the baking sheet spray head, remove it from the appliance. 1. Turn the baking sheet spray head anticlockwise and remove from the holder. 2. Insert the top basket in the appliance.
aus Before using for the first time Before using for the first time Rinse aid system Before using for the first time Rinse aid system Configure the settings for initial startup. You can use the rinse aid system and rinse aid to get tableware and glasses rinsed perfectly without marks. Making settings for initial start-up Rinse aid Before using for the first time On initial start-up or after a reset to the factory settings, you will need to make settings.
Detergent Spilled rinse aid can cause excessive frothing during the wash cycle. 4. Close the lid of the dispenser for rinse aid. a The lid clicks into position. Setting the amount of rinse aid If there are streaks or water marks on tableware, change the amount of rinse aid. 1. Press . 2. To open the basic settings, press for 3 seconds. a The display shows . 3. Press repeatedly until the display shows the value set at the factory r05. 4. Press repeatedly until the right amount of rinse aid has been set.
aus Detergent Detergent Powder detergent Liquid detergent Description leave residues of detergent. This may impair the cleaning effect. Powder detergent is recommended for shorter "Programmes" → Page 17. The dosage can be adjusted to the level of soiling. Liquid detergent works faster and is recommended for shorter "Programmes" → Page 17 without PreRinse. Sometimes liquid detergent may leak out despite the detergent dispenser being closed.
Detergent ¡ ¡ ¡ ¡ ¡ ¡ levels of active agents or completely dispense with certain substances. The cleaning effect may be restricted here. Set the rinse aid system to the separate or combined detergent in use. Follow the manufacturer's instructions for each detergent. To prevent sticking, only touch detergents in a water-soluble pouch with dry hands and only ever place them in a dry detergent dispenser.
aus Tableware 3. Close the lid of the detergent dis- penser. Damage to glass and tableware Avoid damage to glass and tableware. a The lid clicks into position. a The detergent dispenser will open automatically at the optimum time during the programme. Powder or liquid detergent will spread around the washing tank and dissolve there. Tablets will fall into the tablet collecting tray and dissolve in the right dosage.
Tableware Cause The water temperature of the programme is too high. Recommendation Select a programme with lower temperatures. After the programme has ended, take glassware and cutlery out of the appliance without delay. Arrange tableware Arrange the tableware correctly to optimise the dishwashing result and prevent damage to both the appliance and tableware. Tips ¡ Using the appliance allows you to save energy and water compared to washing-up by hand.
aus Basic operation Removing tableware WARNING Risk of injury! Hot tableware can cause burns to the skin. When hot, tableware is sensitive to shock, may crack and can result in injury. ▶ When the programme has ended, do not empty the appliance until the tableware has cooled down for a while. 1. To prevent water dripping on the tableware, unload it starting at the bottom and working up. 2. Check the washing tank and accessories for soiling and clean if necessary.
Basic operation aus Tip: To deactivate timer programming, press repeatedly until "h:00" appears in the display. Deactivate button lock Starting the programme Interrupting programme ▶ Press . a The programme has ended when the display shows "0h:00m". Note: When you open the appliance door once the appliance has heated up, leave the door slightly ajar for a few minutes and then close it. This will help prevent excess pressure building up in the appliance and stop the appliance door bursting open. 1.
aus Basic settings Basic settings Basic settings You can configure the appliance to meet your needs. Basic settings Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Rinse aid dispensing Display text r05 1 Selection r00 - r06 Intensive drying d00 1 d00 - d01 Hot water A00 1 A00 - A01 Wi-Fi Cn0 Cn0 - Cn1 1 32 Factory setting (may vary according to model) Description Set the amount of rinse aid to be dispensed.
Home Connect Basic setting Remote Start Display text rc1 Selection rc0 - rc2 Factory setting rE Start with YES Confirm with 1 Description Activate or deactivate → "Remote Start ", Page 34. The following settings are possible: ¡ With the setting "rc0", the function is permanently deactivated. ¡ With the setting "rc1", the function can be selected via the button. → "Activating Remote Start ", Page 34 ¡ With the setting "rc2", the function is permanently activated.
aus Home Connect The Home Connect app guides you through the entire login process. Follow the instructions in the Home Connect app to configure the settings. Tips ¡ Please consult the documents supplied by Home Connect. ¡ Please also follow the instructions in the Home Connect app. Note: Please note the safety precautions in this instruction manual and make sure that they are also observed when operating the appliance via the Home Connect app.
Cleaning and servicing ▶ Press . If you open the appliance door, the function is automatically deactivated. a button lights up. Tip: To deactivate the function, press . Remote Diagnostics Customer Service can use Remote Diagnostics to access your appliance if you contact them, have your appliance connected to the Home Connect server and if Remote Diagnostics is available in the country in which you are using the appliance.
aus Cleaning and servicing Cleaning products Only use suitable cleaning products to clean your appliance. → "Safe use", Page 10 Tips on appliance care Follow the tips on appliance care to make sure your appliance functions properly at all times. Action Wipe the door seals, the front of the dishwasher and the con- Action Benefit trol panel regularly using a damp cloth and washing-up liquid. If the appliance is not This will prevent ungoing to be used for a pleasant odours.
Cleaning and servicing Notes ¡ Run the Machine Care programme without any tableware in the dishwasher. ¡ Only use machine care products and machine cleaners specially designed for dishwashers. ¡ Make sure that there are no aluminium parts, e.g. extractor hood grease filters or aluminium pans, in the interior of the appliance. ¡ If you have not run Machine Care after 3 washing cycles, the indicator for Machine Care will go out automatically.
aus Cleaning and servicing 3. Pull down the micro filter to re- Cleaning spray arms move. Limescale and soiling in the dishwashing water may block the nozzles and bearings on the spray arms. Clean the spray arms regularly. 1. Unscrew the upper spray arm and pull down to remove . 1 4. Press the locking catches together and lift the coarse filter out . 2 2 2. Pull up the lower spray arm to re- 1 move. 5. Clean the filter elements under run- ning water.
Troubleshooting aus Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs. Troubleshooting WARNING Risk of electric shock! Improper repairs are dangerous. ▶ Repairs to the appliance should only be carried out by trained specialist staff. ▶ Only use genuine spare parts when repairing the appliance.
aus Troubleshooting Fault E:32-00 will light up alternately or indicator for water supply lights up. Cause Water tap is jammed or furred up. Troubleshooting ▶ Turn on the water tap. The flow rate must be at least 10 l/ min when the water supply is open. The filters in the water con- 1. Switch off the appliance. nection of the supply or 2. Pull out the mains plug. AquaStop hose are blocked. 3. Turn off the water tap. 4. Unscrew the water connection. 5. Remove the filter from the supply hose 6.
Troubleshooting aus Fault E:61-02 will light up alternately. Cause Cover of the wastewater pump is loose Troubleshooting ▶ Secure the cover of the "Wastewater pump " → Page 50 so it clicks into position. E:90-01 will light up alternately. Mains voltage is too low. This is not a fault on the appliance. 1. Contact an electrician. 2. Have the mains voltage and electrical installation checked by an electrician. A different error code apA technical fault is present. pears in the display window.
aus Troubleshooting Fault Tableware is not dry. Cause Troubleshooting Water collects in recesses of ▶ Position tableware at an angle the tableware or cutlery. where possible. The combined detergent used has a poor drying performance. 1. Use rinse aid to improve drying per- formance. 2. Use a different combined detergent with a better drying performance. Extra Dry not activated to im- ▶ Activate Extra Dry. prove drying performance. Tableware removed too 1. Wait until the programme ends.
Troubleshooting Fault Remnants of food on tableware. aus Cause Tableware is placed too close together or basket is overfilled. Troubleshooting 1. Arrange tableware with sufficient space in between. The spray jets must reach the surfaces of the tableware. 2. Avoid points of contact. Spray arm rotation is blocked. ▶ Arrange tableware so that it does Spray arm nozzles are blocked. Filters are soiled. ▶ Clean the "Spray arms" → Page 38. Filters are inserted incorrectly and/or not engaged. 1.
aus Troubleshooting Fault Detergent residue in the appliance Water marks on plastic parts. Cause Tabs are used in the quick or short programme. Dissolving time of the tab is not attained. Washing effect and dissolving performance are reduced after a prolonged storage time or detergent is very lumpy. Due to laws of physics droplet formation on plastic surfaces is unavoidable. After drying water marks are visible. Troubleshooting ▶ Select a more intensive Programme or use Powder detergent.
Troubleshooting Fault Coloured coatings (blue, yellow, brown) that are difficult or impossible to remove are present inside the appliance or on stainless steel tableware. aus Cause Troubleshooting The formation of films is due ▶ Clean the appliance. to substances contained in You can remove deposits with vegetables (cabbage, celery, "Mechanical cleaning" → Page 35 potatoes, noodles, etc.) or or a machine cleaning product. It tap water (manganese).
aus Troubleshooting Fault Removable streaks are present on glasses, glassware with a metallic appearance and cutlery. Irreversible clouding of glassware. Cause Troubleshooting ▶ Only remove large remnants of food Tableware has been precleaned too intensely. The and do not prerinse tableware. sensors chose a weaker programme. Stubborn soiling cannot be entirely removed. Glasses are not dishwasher- ▶ Use dishwasher-proof glasses. proof, only suitable for dishGlasses are usually only suitable for washers.
Troubleshooting aus Home Connect problem Fault Connection to home network is not established. Cause WLAN on router is not active. Troubleshooting ▶ Check the wireless network connection of your router. WLAN display is flashing. Connection to home network is not available. ▶ Activate the wireless network con- Home Connect set incorrectly. ▶ Please consult the documents sup- Technical fault is present. ▶ Please consult the information Home Connect cannot be implemented correctly.
aus Troubleshooting Fault Appliance does not start. Cause The mains fuse has tripped. Troubleshooting ▶ Check the relevant fuse. Mains cable is not inserted. 1. Check whether the socket works. 2. Check whether the mains cable is properly inserted in the socket and on the rear of the appliance. Programme starts automatically. Appliance stops during the programme or cuts out. Appliance door is not closed ▶ Close the appliance door. properly.
Troubleshooting aus Noise Fault Cause Troubleshooting Filling valves making knock- Caused by the domestic in- ▶ Can only be remedied in the doing noises. stallation. No appliance fault mestic installation. present. Does not affect functioning of the appliance. Knocking or rattling noise. Spray arm is striking table- ▶ Arrange tableware so that the spray ware. arms do not strike tableware. With a small load the water jets directly strike against the tub. ▶ Distribute the tableware evenly.
aus Transportation, storage and disposal Clean wastewater pump 8. Insert the pump cover down Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. WARNING Risk of injury! Sharp and pointed objects or fragments of glass may block the waste water pump and cause injury. ▶ Remove any foreign bodies carefully. 1. Disconnect the appliance from the power supply. 2.
Customer Service Protect appliance from frost Disposing of old appliance If there is a risk of frost where the appliance will be standing, e.g. in a holiday home, empty the appliance completely. ▶ "Empty the appliance." → Page 51 Valuable raw materials can be reused by recycling. Transporting the appliance To avoid damage to the appliance, empty it before transporting. Note: Always transport the dishwasher upright to prevent residual water getting into the machine's controls and damaging the appliance.
aus Technical specifications With any warranty claims, we will make sure that your appliance is repaired by trained after-sales technicians using genuine spare parts, including after the manufacturer's warranty has expired. Detailed information on the warranty period and terms of warranty in your country is available from our aftersales service, your retailer or on our website. If you contact Customer Service, you will require the product number (ENr.
Technical specifications aus Information regarding Free and Open Source Software This product includes software components that are licensed by the copyright holders as free software or open source software. The applicable licence information is stored on your home appliance. You can also access the applicable licence information via your Home Connect App: "Profile -> Legal information -> Licence Information".
Thank you for buying a Bosch Home Appliance! Register your new device on MyBosch now and profit directly from: • • • • • Expert tips & tricks for your appliance Warranty extension options Discounts for accessories & spare-parts Digital manual and all appliance data at hand Easy access to Bosch Home Appliances Service Free and easy registration – also on mobile phones: www.bosch-home.com/welcome Looking for help? You'll find it here.
