Installation Instructions

13
Electrical Connection
Avoid Electrical Shock Hazard!
Do not work on an energized circuit. Doing so could result in
serious injury or death. Only qualified electricians should perform
electrical work. Do not attempt any work on the dishwasher
electric supply circuit until you are certain the circuit is de-
energized.
To avoid possible injury or property damage, care should be exer-
cised when the dishwasher is installed or removed to reduce the
likelihood of damage to the power cord.
Avoid Fire Hazard!
Make sure electrical work is properly installed and checked by
qualified electricians.
Make sure there are no loose electrical connections. Make sure
all electrical connections are properly made.
WARNING
!
Dishwasher Electrical Rating
Volts Hertz Amperes Watts
120 60 12 1,440
(max)
Electrical Supply
The customer has the responsibility of ensuring that the dishwasher electri-
cal installation is in compliance with all national and local electrical codes
and ordinances. The dishwasher is designed for an electrical supply of
120V, 60 Hz, AC, connected to a dishwasher-dedicated, properly grounded
electrical circuit with a fuse or breaker rated for 15 amps. Electrical sup-
ply conductors shall be a minimum #14 AWG copper wire rated at 75°C
(167°F) or higher.