Use and Care Guide

en-us Loading the Dishwasher
30
Adjusting the height of the
rack
If desired, the height of the upper
rack 12 can be adjusted to create
more space for taller utensils either in
the upper or lower rack.
Arrange large plates up to a diameter
of 12.6 in (32 cm) in the lower
basket 9* as illustrated.
RackMatic
®
The height of the upper rack 12 can
be adjusted in 3 steps to create more
space.
1. Pull the upper rack out of the
dishwasher until it stops.
2. To lower the rack, push the
RackMatic® lever inward.
3. To raise the rack, hold the basket
on the sides of the upper rack
and lift it up.
Note: Check spray arm for clearance
after adjustment.
Rack accessories
Flip tines
The upper and lower rack are fitted
with flip tines that can be folded
down depending on what you may
need to load in the rack.
Lower rack flip tines: To fold down,
pull flip tine gently forward and
release it from the notch. Push the
flip tine downward. To fold up, push
flip tines into an upright position until
the holder engages in the notch.
With silver-
ware basket
Upper rack Lower rack
Setting 1
max. ø
9.4 in
(24 cm)
12.6 in
(32 cm)
Setting 2
max. ø
10.4 in
(26.5 cm)
11.8 in
(30 cm)
Setting 3
max. ø
11.4 in
(29 cm)
10.6 in
(27 cm)
With
third rack
Upper rack Lower rack
Setting 1
max. ø
7 in (18 cm) 12.6 in
(32 cm)
Setting 2
max. ø
8 in
(20.5 cm)
11.8 in
(30 cm)
Setting 3
max. ø
9 in
(23 cm)
10.6 in
(27 cm)