Installation Instructions

Drain Connection

• Connect the dishwasher water supply line to the water shut o valve.

If one isn’t already in the supply line, install one (not provided).

• You will need to use an approved dishwasher water supply line with

the correct fittings for this connection.

• After all connections are made, turn on the hot water and check for

leaks.

IMPORTANT NOTES about your drain connection:

• If local ordinance require an air gap, install it according to the manu-

facturer’s instructions.

• If the dishwasher drain hose is to be connected to a disposer dishwasher

drain connection, remove the plug from the disposer’s dishwasher drain

connection.

• The dishwasher drain hose must have one place along its length that is

securely attached 33″ (508 mm) above the cabinet floor.

• The drain hose length can be extended if necessary. The maximum

length of the drain hose, including the hose leading to the air gap, is

150″ (380 cm).