Use and Care Manual

Troubleshooting en-us
29
Issue Cause and troubleshooting
E:92-10 lights up alternately. Spray arm rotation of the lower spray arm is blocked.
▶ Arrange the dishware so that it does not obstruct spray arm rotation of the lower
spray arm.
Lower spray arm is not correctly fitted.
▶ Fit the lower spray arm correctly.
E:92-40 lights up alternately. Filters are soiled or blocked.
▶ Clean the filters.
→ "Cleaning filters", Page25
A different error code appears in
the display window.
E:01-00 to E:90-10
There is a technical issue.
1. Press .
2. Pull out the power cord plug of the appliance or switch off the breaker.
3. Wait at least 2minutes.
4. Insert the power cord plug of the appliance in a power outlet or switch on the
breaker.
5. Switch the appliance on.
6. If the problem occurs again:
‒ Press ⁠.
‒ Turn off the water faucet.
‒ Pull out the power cord plug.
‒ Contact customer service → Page36 and give the error code.
Dishware is not dry. No rinse aid used or dosage set too low.
1.
Add Rinse aid → Page15 .
2. Set the amount of rinse aid to be dispensed.
→ "Setting the amount of rinse aid", Page16
Cycle or cycle option has no drying phase, or drying phase is too short.
▶
Select a wash cycle with drying. → Page10
Some option buttons decrease the drying result.
Water collects in recesses of dishware or silverware.