Installation Instructions

Grounding Instructions

The dishwasher must be properly grounded before operating. This appli-

ance must be connected to a grounded metal permanent wiring system or

an equipment grounding conductor must be run with the circuit conductors

and connected to the equipment grounding terminal or lead on the dish-

washer.

Do NOT use an extension cord.

Make sure that the dishwasher is connected to a suitable ground in compli-

ance with all local codes or, in the absence of a local code, with the NA-

TIONAL ELECTRICAL CODE in the United States or the CANADIAN ELEC-

TRIC CODE C22.1-latest edition in Canada as well as any provincial/state

or municipal or local codes that apply.

Note: Installations employing a Receptacle - The accessory cord kit, Model

SMZPC002UC, designed for connection to a receptacle is not provided, but

can be ordered through Customer Service by calling 1-800-944-2904. Make

sure the household receptacle meets the electrical supply requirements as

well as national and local codes. If you choose to permanently connect to

hardwiring, follow the next steps.

• Turn o any electricity to installation area.

• Remove screws and cover from junction box (A) and set aside for later

use.

• Remove outer casing and insulation of the hardwiring/power cord as

shown.







