Instruction Manual

en-us Operating the Dishwasher
40
TimeLight
®
(Light display
while the wash cycle is
running)
While wash cycle is running, a light
display (additional cycle information)
shines on the floor under the
appliance door. If the base panel is
pulled forwards or if the appliance is
installed at eye-level with flush
furniture front, the display is not
visible.
This feature has three settings:
Time remaining displays:
To change the setting:
1. Open the door.
2. Press On/Off button (.
3. Hold down function key # and
press Start button P until the
display 8 shows •:‹x or š:‹x
(x can be any number).
4. Release both buttons.
The light above function key #
flashes and the display 8
shows the factory set value.
5. Press function key # until the
display 8 shows the factory set
value †:‹‚.
6. Press function key 3 to switch
between †:‹‹, †:‹‚ and †:‹ƒ.
7. Press Start button P to save
setting.
†:‹‹ Light display is switched off.
†:‹‚ Displays time remaining and
cycle progress alternating
with the Bosch
®
logo (about
5 seconds per image).
†:‹ƒ Like †:‹‚ but displays wash
cycle icons instead of the
logo.
!
Bosch
®
logo
Pre-rinse
Cleaning
Rinsing
Drying