Use and Care Manual
Table Of Contents
- Dishwasher
- en-us
- Table of contents
- 1 IMPORTANT SAFETY INSTRUCTIONS
- 2 Preventing material damage
- 3 Environmental protection and energy-saving
- 4 Familiarizing yourself with your appliance
- 5 Dishwasher Cycles
- 6 Options
- 7 Features
- 8 Before using for the first time
- 9 Rinse aid system
- 10 Detergent
- 11 Dishware
- 12 Basic Operation
- 12.1 Protection against unintentional operation
- 12.2 Switching on the appliance
- 12.3 Setting a cycle
- 12.4 Setting options
- 12.5 Setting the time delay
- 12.6 Starting the wash cycle
- 12.7 Activating the button lock
- 12.8 Deactivating the button lock
- 12.9 Interrupting the wash cycle
- 12.10 Terminating the wash cycle
- 12.11 Switching off the appliance
- 13 Basic settings
- 14 Home Connect®
- 15 Cleaning and maintenance
- 16 Troubleshooting
- 17 Transportation, storage and disposal
- 18 Customer Service
- 19 Technical specifications
- 20 STATEMENT OF LIMITED PRODUCT WARRANTY
en-us HomeConnect®
20
2. To open the appliance settings, press button for 3
seconds.
1
2
3
A
A
a The refill indicator for rinse aid flashes.
3. Press button repeatedly until the Rinse Aid and
Sanitize LEDs flash.
4. Press button repeatedly until the LED (1) lights up.
1
2
3
A
1
If the LED is not lit up, Wi-Fi is switched off.
If the LED is lit up, Wi-Fi is switched on.
5. To store the settings, press button for 3 seconds.
Setting the signal volume
1. Press .
2. To open the appliance settings, press the button for 3
seconds.
1
2
3
A
A
a The refill indicator for rinse aid flashes.
3. Press the button repeatedly until the Clean and Rinse
Aid LEDs flash.
4. Press the button repeatedly until the right signal
volume has been set.
1
2
3
A
21 3
0, 1, 2 or 3 LEDs will light up accordingly. The selected
signal tone will sound.
The factory setting is level 2.
5. To store the setting, press the button for 3 seconds.
Restoring factory settings
1. Press .
2. To open the appliance settings, press the button for 3
seconds.
1
2
3
A
A
a The refill indicator for rinse aid flashes.
3. Press the button repeatedly until the Clean, Rinse Aid
and Sanitize LEDs flash.
4. Press the button.
a The LEDs flash. The appliance is reset to factory
settings.
1
2
3
A
21 3
HomeConnect®
14 HomeConnect®
HomeConnect®
This appliance is network-capable. Connecting your
appliance to a mobile device lets you control its functions
via the HomeConnect® app.
The HomeConnect® services are not available in every
country. The availability of the HomeConnect® function
depends on the availability of HomeConnect® services in
your country. You can find information on this at:
www.home-connect.com.