Use and Care Manual
Table Of Contents
- Dishwasher
- en-us
- Table of contents
- 1 IMPORTANT SAFETY INSTRUCTIONS
- 2 Preventing material damage
- 3 Environmental protection and energy-saving
- 4 Familiarizing yourself with your appliance
- 5 Dishwasher Cycles
- 6 Options
- 7 Features
- 8 Before using for the first time
- 9 Rinse aid system
- 10 Detergent
- 11 Dishware
- 12 Basic Operation
- 12.1 Protection against unintentional operation
- 12.2 Switching on the appliance
- 12.3 Setting a cycle
- 12.4 Setting options
- 12.5 Setting the time delay
- 12.6 Starting the wash cycle
- 12.7 Activating the button lock
- 12.8 Deactivating the button lock
- 12.9 Interrupting the wash cycle
- 12.10 Terminating the wash cycle
- 12.11 Switching off the appliance
- 13 Basic settings
- 14 Home Connect®
- 15 Cleaning and maintenance
- 16 Troubleshooting
- 17 Transportation, storage and disposal
- 18 Customer Service
- 19 Technical specifications
- 20 STATEMENT OF LIMITED PRODUCT WARRANTY
en-us Basic Operation
18
12.10 Terminating the wash cycle
To end a cycle early or to switch from one that has already
started, you will need to cancel it first.
▶ Press for approx. 4seconds.
a All displays light up.
a As soon as the displays are off, the residual water is
pumped out.
a The cycle is cancelled and ends after approx. 1minute.
12.11 Switching off the appliance
CAUTION
To avoid risk of injury, always use caution when opening
the door during or following a wash cycle as hot water or
steam may escape.
▶ Do not fully open the door until water noises have
stopped and steam has subsided.
1. Please note the information on Preventing Material
Damage →
Page6
.
2. Press On/Off.